Jyd For Aaac & Acsr Compression Splices-

Jyd For Aaac & Acsr Compression Splices

Splice assemblies for AAAC&ACSR conductors consist of an aluminum outer extrusion splice body and steel an inner steel tubular core. The two piece design ensures design strength equivalent to the conductor onto which the fitting is applied. Each fitt...

Jy For Ascr Compression Splices-

Jy For Ascr Compression Splices

Full Tension Compression Midspan Joints are manufactured from an Aluminum outer extrusion splice body, and an inner steel tubular core. The two piece design ensures strength equivalent to the conductor onto which the fitting is applied.Each fitting i...

Ny Compression Tension Clamp For Acs Conductor-

Ny Compression Tension Clamp For Acs Conductor

Full Tension deadend assembly for ACS conductors consists of a aluminum deadend body pre-compressed onto a steel unit, a jumper terminal, mounting hardware and core gripping unit. Material: Body: Seamless extruded Aluminum Alloy tube Eye: Galvanized ...

Ny Compression Tension Clamps For Ascr Conductors-

Ny Compression Tension Clamps For Ascr Conductors

Compression dead end clamps are used in all areas of overhead line construction, which is both for substations and for transmission lines. The greatest possible strength is achieved with compression dead end clamps; for example: with ACSR conductors ...

Ny Compression Tension Clamps For Acsr/as Conductors-

Ny Compression Tension Clamps For Acsr/as Conductors

Full Tension deadend assembly for ACSR/AS conductors consists of a aluminum deadend body pre-compressed onto steel unit, a jumper terminal, mounting hardware and core gripping unit. Material: Body: Seamless extruded Aluminum Alloy tube Eye: Galvanize...

Nll Tension Clamps-

Nll Tension Clamps

NOTES: (1) Recommended torque on bolts; 10: Nm; 12: Nm. (2) For optional stainless steel U bolts add “E” to catalog number. Example: NLL-1GS. (3) It usually use with fitting like clevis and socket eye , need order separated, you can add Suffix “Q” fo...

H Type Aluminum Tap Connector Jh-

H Type Aluminum Tap Connector Jh

Type Main (mm2) Main (mm) Branch (mm2) Branch (mm) Length (mm) Pressed Time JH-1 16-35 4.8-8.2 16-35 4.8-8.2 38 O 3 JH-2 50-95 8.3-14.5 16-50 4.8-9.5 48 D 3 JH-3 50-95 10.0-14.5 50-95 10.0-14.5 60 D 5 JH-4 95-240 13.0-22.5 16-70 4.8-11.5 51 N 4 JH-5 ...

Cca Crimp Connector-

Cca Crimp Connector

Range-taking compression tap connector made of pure copper. Designed to be gripped in the jaws or dies of installation tool, and then slipped directly over line for easy installation. Also used for deadending. Product Facts ·Made of pure electroly...

Wcjc Brass Bolted Clamp-

Wcjc Brass Bolted Clamp

Wcjb Copper Bolted Clamp-

Wcjb Copper Bolted Clamp

Hot Line Tap Clamp-

Hot Line Tap Clamp

For Aluminum, ACSR, and armor rod covered aluminum or ACSR conductor designed to accommodate the stud of the arrester in the rear extension of the connector. Material: Body and Keeper Aluminum Alloy Eye bolt: stainless steel; Eye connector: bronze...

T/j Brass Clamp Line Taps Split Bolted Clamp-

T/j Brass Clamp Line Taps Split Bolted Clamp

Split-bolt was for connecting aluminum to aluminum or copper conductors. Split-bolt has free-running threads and easy to grip wrench flats. It was highly resistant to cracking and corrosion. Hex Head design for maximum tool ease of use. Material:...

Fd Damper-

Fd Damper

For aluminum-, al-alloy-, ACSR-, AACSR- and alumoweld conductors. Weights are cast onto the messenger wire. Material: Weights: cast iron, hot dip galvanized Messenger cable: steel, hot dip galvanized Clamp: aluminum-alloy, forged Bolt: steel，hot dip ...

Fdz Dogbone Vibration Damper-

Fdz Dogbone Vibration Damper

The Dogbone vibration damper FDZ is an advanced and completely new form of the accepted “Stockbridge” dampers. In addition to the two ranges covered and by virtue of the weight design and positioning on the messenger, we are able to increase the ener...

Fr Vibration Damper-

Fr Vibration Damper

FR damper Installation instructions for vibration dampers 1. Dampers shall be located from the center of the damper clamp to either the dead end or the suspension supportas shown above. 2. The orientation of the damper weights along the conductor is...

Jbe(jx) Repair Sleeve-

Jbe(jx) Repair Sleeve

Two piece repair sleeve is used to restore electrical and mechanical integrity to conductors with damage to strands in the outer layer only. Tapers are covered with strippable plastic. If damage extends to the inner layer of aluminum or alloy strands...

Jyt Jumper Clamp-

Jyt Jumper Clamp

Jy-35ly For Insulated Overhead Conductors Full-tension Compression Splices-

Jy-35ly For Insulated Overhead Conductors Full-tension Compression Splices

Full Tension Midspan Joints, are manufactured from an Aluminum extrusion, equivalent in strength to the conductor onto which the fitting is applied. Each fitting is manufactured with tapers, to eliminate stresses associated with compression, and redu...

Jy-150l For Aac & Aaac Full-tension Compression Splices-

Jy-150l For Aac & Aaac Full-tension Compression Splices

Full Tension Midspan Joints, are manufactured from an Aluminum extrusion, equivalent in strength to the conductor onto which the fitting is applied. Each fitting is manufactured with tapers, to eliminate stresses associated with compression, and redu...

Jy For Acsc Full-tension Compression Splices-

Jy For Acsc Full-tension Compression Splices

Splice assemblies for ACSC conductors consist of an aluminum outer extrusion splice body and steel an inner steel tubular core. The two piece design ensures design strength equivalent to the conductor onto which the fitting is applied. Each fitting i...

Jyd For Aaac & Acsr Compression Splices-

Jyd For Aaac & Acsr Compression Splices

Splice assemblies for AAAC&ACSR conductors consist of an aluminum outer extrusion splice body and steel an inner steel tubular core. The two piece design ensures design strength equivalent to the conductor onto which the fitting is applied. Each fitt...

Jy For Ascr Compression Splices-

Jy For Ascr Compression Splices

Full Tension Compression Midspan Joints are manufactured from an Aluminum outer extrusion splice body, and an inner steel tubular core. The two piece design ensures strength equivalent to the conductor onto which the fitting is applied.Each fitting i...

Ny Compression Tension Clamp For Acs Conductor-

Ny Compression Tension Clamp For Acs Conductor

Full Tension deadend assembly for ACS conductors consists of a aluminum deadend body pre-compressed onto a steel unit, a jumper terminal, mounting hardware and core gripping unit. Material: Body: Seamless extruded Aluminum Alloy tube Eye: Galvanized ...

Ny Compression Tension Clamps For Ascr Conductors-

Ny Compression Tension Clamps For Ascr Conductors

Compression dead end clamps are used in all areas of overhead line construction, which is both for substations and for transmission lines. The greatest possible strength is achieved with compression dead end clamps; for example: with ACSR conductors ...